plate pushing peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
peg to keep 2 olympic weight plates together while doing plate pushing exercises. 2" peg fits standard olympic weights.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
a very basic peg to keep 2 weight plates together while doing plate pushing exercises. fits the standard 2" olympic weight plates snugly. I printed with ABS, but it probably could be done with PLA. you'll want to print it on its side, with the flat part of the cap facing the build plate. I did that so its oriented in a way that's strongest in use. it is a bit more painful to print that way, and yeah you'll need supports, but its really strong. I printed with 60% infil, but you could probably get away with 25-30% if using abs/asa. I also did 7 perimeters/top/bottom, just because it'll take a beating over years.