1 / 7
Wheel Bolt Ball Seat / Radschrauben Kugelbund — zdjęcie 1
1 / 7

Wheel Bolt Ball Seat / Radschrauben Kugelbund

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

So I got some wheel bots left from wheels I don't have anymore. As I wanted to measure them, I did not find any way of…

Ocena
0 / 5
Polubienia
6
Pobrania
141
Wydruki
0
Wyświetlenia
531
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

So I got some wheel bots left from wheels I don't have anymore. As I wanted to measure them, I did not find any way of measuring the ball seat properly.

Quick and easy did this part and it comes very helpful. Just place the lug bolt in one of the three cavities to find out where the radius fits. R12, R13 and R14 each have one cavity.

Also there's one part for M12 and one for M14. but the M14 part should fit for both.


Ich habe Radrauben deren Kugelbund ich ausmessen wollte. Leider habe ich keine gute Methode gefunden wie man den Kugelbund messen kann und mir daher diese Teile gemacht.

Einfach die Radschrauben in den einzelnen Aussparungen testen und schon zeigt sich welchen Radius der Kugelbund denn hat. Die Aussparungen sind für R12, R13 und R14. Außerdem gibt es ein Teil für M12 und eines für M14-Schrauben. Die größere Version sollte mit beiden Schrauben funktionieren, aber wenn man schon dabei ist, kann man auch beide konstruieren. :-)

Print Settings

Printer Brand:

Anycubic

Printer:

All-metal Mega

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

20 %

Filament: das Filament PLA Greengold


Notes:

By the way, I think it's good to have a part printed in contrast to your screws. So a dark part for a galvanized screw and a bright part for dark screws. Just in case of bad eye sight ;-)


Kleiner Tipp noch: um Kugelbund und Radschraube im Teil gut zu erkennen, helfen kontrastreiche Farben. Einfach damit sich verzinkte oder schwarze Schrauben gut vom Druckteil abheben.

Category: Automotive

Tagi