Harbor Freight 7-Piece Drill Stop Holder for Altoids Tin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert to organize and store 7-piece drill stop set in an Altoids tin.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Insert to organize and store 7-piece drill stop set in an Altoids tin. While this is specifically made for a Harbor Freight's Drill Master brand set, it could theoretically fit any brand in sizes 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in. Each size is labeled next to its respective location; note perfectly, but I did what I could. There is a cavity on the underside behind the hex wrench holder that you can insert a magnet into (it's a little oversized for the size magnet I used, so just dropped some hot glue to keep it in place).