1 / 2
Peg Board Hook (1/4in Remix) — zdjęcie 1
1 / 2

Peg Board Hook (1/4in Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Peg Board Hook Remix for 1/4in (or 6.25mm) Holes

Ocena
5 / 5
Polubienia
34
Pobrania
314
Wydruki
0
Wyświetlenia
908
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I needed a sturdy hook for my new peg board and the original STLs were too thin/skinny in my case. I made these STLs from scratch in Blender using Metaballs and paths tracing the original. Hopefully this works for others that have a peg board that have ¼-in holes (6.25mm) and 1-in spaced apart.