1 / 3
Stiffer X-End for Prusa Mini with tension screw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a screw for easy tension adjustment.
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 513
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 11)Remiksy (0)Kolekcje (38)Powiązane
It's difficult to adjust the tension when it's in an enclosure, so I added a screw so that you can easily adjust the tension even if there's a wall on the left.
Requires a DIN562 M3 square nut like the original mod.
October 16, 2023 Data has been slightly revised. If you print the screw size as is, it should be fine.
January 14, 2024 The retainer's XZ-axis adjustment screw hole was returned.