1 / 4
Organizer for 1/64 diecast in acrylic case (Inno64, Tarmac, Hobby Japan, Para64 and similar)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For stacking and protecting your 1/64 diecast in acrylic case collection.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 730
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Extra requirements:
- all holes are 2,5mm, use M3 thread tap taper drill bit tool;
- 3x8mm and 3x4mm studs for assembly.