8mm/Super8 Film Projector Reel - Autoloading
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple autoloading reel I designed for my Elmo K-100SM film projector.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 466
- Wydruki
- 2
- Wyświetlenia
- 1793
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Simple 8mm film reel. I modeled it after the autoloading reel that came with my projector. I cannot guarantee compatibility with other models of projectors, but I attached an editable .step file so the model can be easily remixed.
The reel has to be printed in 2 pieces (Side A and Side B).
The pieces interlock and have to be glued together. I recommend putting some CA glue in the circular channel of side B and then joining the two pieces.
I recommend printing it out of PETG since the small arms need to be flexible. That being said I believe that PLA should also work fine. The model will fit on a Prusa MINI. It can be printed even with a 0.6mm nozzle without issues (it's my standard nozzle). 0.4mm will obviously also be fine.