Another Tardis Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dice tower shaped like the Tardis.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 249
- Wydruki
- 4
- Wyświetlenia
- 1334
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A dice tower shaped like the Tardis.
Print instructions
Category: Dice Summary
A dice tower shaped like the Tardis.
How I Designed This
I tightened the stepped spiral of my yin yang tower to fit 3.5 rotations inside the body of the tardis. I think its angled about 30 degrees from horizontal, but with the same 33mm cross-section, so I'm confident that dice won't get stuck.
The tardis itself I modeled based on the published schematics from the Dr Who Experience that ran in Cardiff some years back. They had a poster with the dimensions of the tardis and I built a model based on that, scaled it down to a reasonable size(it was meters tall), then subtracted the dice tower spiral from the middle. Since the spiral was a solid shape designed for spiral vase mode printing, it was just that simple.