1 / 3
iPad(or tablet) holder with flexible flap (wall or bottom mount) — zdjęcie 1
1 / 3

iPad(or tablet) holder with flexible flap (wall or bottom mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple iPad holder with flexible flap I designed it for my iPad with cover (11.0mm thickness) but should work out…

Ocena
5 / 5
Polubienia
58
Pobrania
222
Wydruki
4
Wyświetlenia
2194
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A simple iPad holder with flexible flap

I designed it for my iPad with cover (11.0mm thickness) but should work out for similar size tablets too.
The flexible flap makes the take in-out handling much easier.

The picture shows mine that is bottom mounted on the living room table but I made wall mount version as well. so please chose suitable one for your use.

Please place a side edge down so that you can print without support.
You may need to adjust wall shells to have 100% material on flexible part in the middle, in order to make proper spring function.

Both versions are intended to be fixed by 2 x 4mm screws.

(In Japanese)
シンプルなiPadホルダ(フレキシブルフラップ付き)です。
iPad(+カバー, 厚み11mm)用に作りましたが、似たサイズのタブレットでも使えると思います。
フレキシブルフラップのおかげで、収納•取り出しがしやすくなっています。

写真はリビングのテーブルにボトムマウントしたものですが、ウォールマウント版も作ったので用途に合わせて選んでください。

側面を下にすることで、サポート無しでプリントできます。
壁厚みを調整して、真ん中のバネ部分が100%中実になっているようにしてください。

両バージョンともに4mmのネジ2本で固定することを想定しています。

Print instructions

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Filament: Prusament PETG Galaxy Black

Tagi