1 / 4
Brush for print bed, made of foam rubber / Druckbett-Pinsel aus Moosgummi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print bed brush made of foam rubber / Druckbett-Pinsel aus Moosgummi
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This brush is ideal for applying liquid adhesive (e.g. diluted wood glue) thinly and evenly to improve print bed adhesion. A sheet of foam rubber with a thickness of 2mm is required to cut out a suitable piece (approx. 35x40mm). The mount can be glued to a 67mm diameter jar.