1 / 1
Aquila direct drive dual gear For Satsuma Fan Mount — zdjęcie 1

Aquila direct drive dual gear For Satsuma Fan Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple way to get direct drive and clear Satsuma fan shroud

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

******************** I fixed some problems with V2 model. current model is V3.I needed to make some changes to the original to clear my Satsuma fan shroud and to be able to use my Redrex dual gear extruder. The Redrex has washers on top and the bottom of the lever gear to keep it from eating the softer aluminum like some other dual gear extruders do. Because of the washers it is just a tad taller.
I used PETG with 100% infill and tree supports. .2 layer height
This is not 100% spot on, but it is as close as I could get it using Tinkercad and my limited abilities. It hasn't given me any problems since I made the changes and runs 100% for me.