1 / 4
Ankermake M5 PEI bed plate hanger (air dry)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang your PEI plates to dry with this print!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
Rather than risk getting small particles or fibres on your plate from drying them, hang them to air dry with this print!
Strongly recommend printing this vertically and not on its side, I experienced a failure of the clips on a hanger printed on its side.
Hanging two plates on a single hanger reduces drying speed of the inner-side of the plates. If you're in a hurry, better to print multiple hangers and use one plate per hanger.