Siemens iQ500 fridge KI81RAD30/03 vegetable drawer slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This slider controls the humidity of the vegetable drawer on a Siemens iQ500 KI81RAD30/03 refrigerator.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 480
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For some reason (little kids might have something to do with it) the slider in my fridge (Siemens iQ500, KI81RAD30/03) that controls the humidity of the vegetable drawer, seems to break a lot.
Before I had a 3D printer I had to buy a whole unit (blastic cover, with clips and slider) wich not only costed a lot but waisted plastic for parts I didn't need.
So the last time this broke I opent Sketchup (didn't have Fusion 360 then). After taking measurements with the caliper and modeling it, I printed a test in PLA. As it was ok I reprinted it in ABS (as the original part stated it was ABS).
Used 100% infill to print it and sinds then it hasn't broke anymore.