1 / 7
Mount for Mean Well UHP-500-24 Power Supply on Sovol SV06 Plus — zdjęcie 1
1 / 7

Mount for Mean Well UHP-500-24 Power Supply on Sovol SV06 Plus

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Case to attach a Mean Well UHP-500-24 to a Sovol SV06 Plus to replace the original PSU. Read Disclaimer.

Ocena
5 / 5
Polubienia
24
Pobrania
127
Wydruki
2
Wyświetlenia
2172
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

So, you are looking into replacing the original PSU of your SV06 Plus? You might have come to the right place. Might. This is what I came up with for my personal build. Yours might be different; you have to decide (if the case is strong enough, tough enough, if it might or might not melt, whether you are satisfied with the grounding or whether it will burn down your house…). Build at your own risk. Anyhow, now that I’ve scared you:

 

My motivation for this build was to replace the noisy PSU of the SV06 Plus. Not only the noisy fan, but also the electrical noise, which led to incorrect values on the display, freezing of the printer, crashes and general malfunction. Finally, the auto leveling works reproducibly.

This sharing of the files/case was a hindsight, so no making-of photos and the occasional error in screw length.

Don’t be surprised to find a slightly different design in my photo. As you might spot correctly, I had to use a zip tie to secure the case in place. This should be fixed in the files as in V2 (the files of the one you are looking at right now) I’ve strengthened the sides with an additional stiffener. If this doesn’t cut it, hope you have some zip ties.  Nothing worse than a PSU flopping about in the breeze. Please let me know if further stiffening is needed; I'll update the model in this case.
 

To mount this, you might need:

  • 4 x M3x15 flat-head screws with nuts and washers (for securing the PSU in the case)
  • 2 x M4x25 screws with self-locking nuts and washers (to bolt the assembly to the printer)
  • 4 x M4x20 screws (or longer) with 4 washers and 2 nuts (clamping of the case lower part and installing the power socket)
  • 2 x M4x20 flat head screws (or longer) (to close the upper case part)
     

The old case/PSU comes with – if I remember correctly – 2 x M4x20 and 4 x M4x10. Reuse them responsibly.
 

Printing and assembly:

Print the parts separately with the large flat sides down. Make sure you have a really good printbed adhesion. I cleaned mine mit IPA and heated it to 75 °C for printing. Use a brim if you want to be sure; the top part lifts surprisingly easy. Print 1 x top, 1 x bottom and 2 x either of the fixation blocks. The four fixation blocks can be glued to their pockets with superglue. Remember to press the M3 nuts in place before gluing them.
 

Settings:

Material:             PETG
Layer Hight:     0.2 mm
Nozzle:                0.4 mm
Line Width:       0.5 mm
Supports:           no
Top/Bottom:   4+ Layer
Perimeters:      4+
Infill:                   50 %+

 

All holes are designed to either utilize a nut to secure the screw, or are self-threading (or some kinda both). Assemble everything first, then bolt it to the printer. The first 2.5 mm into the holes for the power switch socket need to be widened with a 4 mm drill if you go for the M4-option. Also, please come up with your own solution how to properly ground your printer. The third cable isn't just decoration. Don't forget to check the output voltage on the PSU which can be adjusted with the potentiometer.

Because the socket for the mains is quite high, consider creating an attachment to secure the power cable to the frame of the printer to prevent damage if someone trips over the cable.

 

Addition: Also keep a close eye on the main power switch that comes with the printer. Mine just had a close-call toasty failure due to a bad connection inside the clicky switch.

 

Have fun building and make it YOUR SV06 Plus! :)

 

________________________________________________________

 

Update: Four months in and everything is working perfectly fine after several kg of filament.
 

________________________________________________________

 

Disclaimer: If you are not qualified and/or do not feel comfortable to safely assemble and connect mains power equipment (like this power supply), DO NOT attempt this build! Before assembly and disassembly ALWAYS DISCONNECT ALL POWER. Check all connections for correct polarity. Check power supply for compatibility. Make sure that ground connections are correctly connected.

I hereby only provide files for a printable case. Whether the assembly based on these files can be, or is made into a safe device, is in your responsibility. If you think a part might bend or break or similar, it is your responsibility to either not build this assembly or fix it to make it safe to use. It is your responsibility to assure that the finished device (the PSU and your printer) is safe to use and does not pose any harm to you or your environment. In your own interest: build something that won’t burn down your house.

 

To be more precise:

By downloading and using the printable files “Mount for Mean Well UHP-500-24 Power Supply on Sovol SV06 Plus“ ("the Files"), you acknowledge and accept the following terms and conditions. Please read this disclaimer carefully before proceeding:

 

1.    Assumption of Responsibility: The Files are provided on an "as-is" basis. The user ("User") acknowledges that they are solely responsible for any and all consequences that may arise from the use, printing, and assembly of the Files. The User agrees to assume full responsibility for their actions and any potential harm that may occur during or after the printing and assembly process.

 

2.    User's Technical Competence: The User understands that the Files requires technical knowledge and expertise to print and assemble correctly. It is the User's responsibility to ensure they possess the necessary skills, knowledge, and equipment to handle the printing process and assembly without endangering themselves, others, or property.

 

3.    Potential Risks: The User acknowledges that working with electrical components, including power supplies, involves inherent risks. The User agrees to exercise caution and take all necessary safety precautions when working with electricity, including but not limited to the proper handling of live wires, proper grounding, and adhering to electrical safety standards and guidelines.

 

4.    Suitability of the Files: The User understands that the Files are provided for informational purposes only and may not be suitable for the specific task or application intended by the User. The User acknowledges that the Files do not guarantee compatibility or functionality with their specific printer or power supply. It is the User's responsibility to evaluate and determine the suitability of the Files for their intended purpose.

 

5.    No Liability: In no event shall the creator of the Files, or any affiliated parties, be held liable for any damages, injuries, losses, or expenses resulting from the use, printing, or assembly of the Files. This includes but is not limited to direct, indirect, incidental, consequential, or punitive damages, arising out of or in connection with the use or inability to use the Files.

 

6.    Compliance with Local Laws and Regulations: The User agrees to comply with all applicable local laws, regulations, and safety standards when using, printing, and assembling the Files. The User is solely responsible for ensuring that the use of the Files complies with any legal and safety requirements specific to their jurisdiction.

 

By downloading and using the Files, the User acknowledges that they have read, understood, and agreed to the terms and conditions of this disclaimer. The User accepts full responsibility for any consequences that may result from their use of the Files and agrees to release the creator of the Files from any liability. If the User does not agree with these terms, they should not download, print or use the Files.

Tagi