Asymmetric Vee Hook Boomerang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook shaped boomerang with some nice range for intermediate or advanced throwers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This mixture between a vee shaped boomerang and a hook has some very nice range; even the relatively small print shown in the cover photo does some 40-50 meters. Throw it low and with a good bit of layover.
Probably more suitable for somewhat experienced throwers.
Caution, this model will probably not fly so well right off the printer. Bend some positive dihedral into it, i.e. bend both wings slightly upwards so they are 1-2 mm off the surface when you press down the elbow on a flat table. The more dihedral, the higher it will fly and vice versa.
Designed in Blender with a non-destructive workflow. Check out the .blend file to see how it was done. You can easily move around the control points in the screenshot shown above to manipulate the shape.