Stream Deck 35º Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, low profile cradle for Stream Deck MK.1 that holds it at a 35º angle
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A simple StreamDeck MK.1 stand that holds the screen at a lower angle (35º) than is possible with the default adjustable stand. This reduces the overall height of the StreamDeck, making it easier to slide under other objects on your desk (like a monitor or laptop stand), and provides an angle that makes the buttons easier to press while still being visible.
Print Instructions
Suggested settings with PLA:
- 100% infill (for this model, infill does not make a difference)
- 0.28 mm or better layer height ("extra draft")
- Position model upside down on the build plate (see image)
- Add supports on bed only to get the cleanest results
- You may want to add a brim if you have trouble keeping the model in place while printing (as pictured, printed with a brim)
As shown, printed with PolyTerra PLA in Charcoal Black with 0.28mm layer height and 15% infill. Sliced in Bambu Slicer and printed on X1C in ~50min.
For a finishing touch, you can add 3mm rubber feet to the bottom corners to prevent the stand from sliding on your desk. Example: Clear Rubber Bumpers Alamic 10 x 3 MM Adhesive Transparent Rubber Feet
Need Help? Feedback?
If you have any questions or trouble with this print, or if you have suggestions for additional revisions, send me a message. Happy printing.
And while you're at it, help yourself to my other prints.