LED Skull Torches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Skull Torches for your Halloween haunt
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- GNU General Public License v3.0
https://www.instructables.com/id/LED-Skull-Torches/
Print the base in any color with your typical settings with support. Print the flame in clear or natural pla/abs with low infill (5%) and thin walls (0.8mm)
I used these for Halloween Skull Torches using foam skulls purchased a Michaels.
Just dig a hole in the top of the skull to accept the bottom of the 3D printed base. Put the ceramic socket into the base, run the leads through to the base of the skull and add a Tayima power connector. Insert the bulb, add the flame cover and stick it on a post (i used bamboo sticks also purchased from Michaels)
These require a 12 volt power supply. You can use a garden light power supply, an old computer PSU or a 12v wall wart adapter.
See a full description of how I built my display here https://www.instructables.com/id/LED-Skull-Torches/
12 volt LED Flame Bulbs: https://www.amazon.com/Dayker-Flickering-Decoration-Christmas-Halloween/dp/B078NS7RC5
Led Socket Ceramic Wire Connector
https://www.amazon.com/DiCUNO-Halogen-Incandescent-Ceramic-Connector/dp/B073FFBSJM
Tamiya Power Connectors
https://www.amazon.com/Pairs-Tamiya-Style-Connector-Unwired/dp/B00XQ91C18