CY-Mount - Damage free steamvr mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SteamVR Base Station Damage-Free Wall mounts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Base staton mount that doesnt require drilling or damaging your walls.
These mounts use standard Command Large strips and provide a very strong/secure vibration free mount for your base stations.
BOM:
- 1x 1/4-20 x 1/2" long screw (such as https://www.amazon.com/Powlankou-Pieces-Button-Socket-Stainless/dp/B07ZSXD89C/ref=sr_1_5?crid=192J99HWQPUQG&keywords=1%2F4-20+1%2F2+Long+screw&qid=1683835112&sprefix=1%2F4-20+1%2F2+long+scr%2Caps%2C153&sr=8-5)
- 70g PLA / PETG filament
- 1x Nodrill SVRBS Backplate print
- 1x 0-40 deg (as needed) SVRBS Bracket print
- 5x Pairs Large Command strips (i strongly suggest the velcro ones https://www.amazon.com/Command-Picture-Christmas-Decorations-Adhesive/dp/B0B3SBD6RR/ref=sr_1_4?crid=ZICAML4O8A5Z&keywords=large+command+strips&qid=1683835208&sprefix=large+command+strip%2Caps%2C134&sr=8-4)Printing:
Print settings are as follows:
0.28 layer height
0.4mm nozzle
5 walls
40% infill
Assembly:
Slide the bracket of choice into the backplate. This connection will be very tight; i suggest using the endge of a table to assist assembly. You will hear a loud click and all parts will be flush when it is fully seated.
Attach 5x large command strip pairs to the rear of the backplate. Arrange them to be centered on each of the beams.
Firmly press the assembly against the wall for at least 30 seconds.
Mount your base station, set angle and attach the 1/4-20 x 1/2" screw.