Basic Knife Holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and easy to personalize to your knives.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from Nightdre4mer 's design which I have used for over a year.
Features
- Added a few angled surfaces (to allow water to flow off)
- Added more fillets
- Added a model with a cutout to add your own top design for your knives. (I kept it to a simple rectangle block so it is easy to draw)
As you can see from the photos, I have printed V2.0 only. I have created V2.1 with slightly more angled surfaces, but I don't want to print it again because V2.0 works well for me.
I also did not print out and verify the no top versions as I do not foresee any significant issues.
The cutout for the top block is 104 x 62 x 12.5mm. I have included a blank top template for reference which is slightly smaller (for clearance). Take note to anticipate bridging sag and try to do a smaller width (60mm) to avoid that.
Your mileage will vary because of different printers' capabilities. The worst case would be to do some filing I guess. 😝
*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s
Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)
AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j
For Amazon affiliate links
https://wp.me/peMLu6-2C