Stacked Covid Face shields - Multiprint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thought of this when I realized that printing one face shield would take 30 minutes, causing lots of manipulations to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Thought of this when I realized that printing one face shield would take 30 minutes, causing lots of manipulations to print large amounts.
Experimented stacking multiple structures stacked vertically, until I could figure proper design that would allow to separate easily the shields.
Print instructions
So !
This is a remix of a popular faceshield STL.
The hardcore part is about setting up your slicer properly.
In order to have this working perfectly, here are very important settings :
- Layers must absolutely be at 0.25, even first layer
- Preferrably print with PETG, go for PLA if really no other choice, avoid ABS absolutely
I managed to have up to 30 face shields printed at once on my MK3, which would take about 14 hours print.
I highly recommend trying first with the 2-faceshields model. They