Tube Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra strong tube clamp that helps you squeeze out as much as possible from your tubes!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried printing the already existing tube clamp for tomato paste, toothpaste, etc but it had next to no surface contact with the bed due to it being heart shaped. It was also a bit small and weak for my taste, so i made a larger, stronger, easier to print version!
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Yes
Supports:
No
Resolution:
0.2mm
Infill:
20% (lines)
Filament: PrimaSelect PETG Transparent Red
Notes:
The walls are 2mm thick for extra strength/flexibility, so make sure to use 5 walls (if using a 0,4mm nozzle). Print it standing with the "key" portion as the base, brim or raft will most likely be needed even though it gets a pretty good contact with the print surface.
Category: Kitchen & Dining