Kubotan Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keychain kubotan used for self defense situations, hit any soft tissue spot and they will let you go ASAP!
- Ocena
- 3,667 / 5
- Polubienia
- 35
- Pobrania
- 356
- Wydruki
- 2
- Wyświetlenia
- 1270
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
So i tried to print a Kubotan i found on Thingiverse, but the base of it sucked and didnt stick well enough to actually finish the print, so i designed my own (and made it a tiny bit less pointy while i was at it).
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
100% (or do 999 top layers)
Filament: PrimaSelect PLA Black
Notes:
Make sure to print it standing (for optimal strength) and use brim to keep it stuck to the bed, i made the brim width 12mm on a PEI flexplate. Recommended to print in 0,12mm for best appearance, but you could get away with other layer heights probably.
Category: Keychains