GoPro Hovership Exopro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I started using Matthew Evans gopro mount for my EXOPRO GOPRO CAMERA BUMPER. Since it did not have the groove for the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I started using Matthew Evans gopro mount for my EXOPRO GOPRO CAMERA BUMPER. Since it did not have the groove for the that mount and did break, I decided to re-draw the entire part. It's basically a copy of Matthew mount but with exopro shape.
It fits over 30.5mm x 30.5mm "standard" hole of a flight controller.
I decided 30deg for now since I started doing medium speed track and the 40deg was to far back. I will eventually do a 40deg for fast track
** Please note that the newest STL file is improved and the pictures are from the initial design.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
30-50%
Category: R/C Vehicles