1 / 4
Organizer for 1/64 diecast in acrylic case (Inno64, Tarmac, Hobby Japan, Para64 and similar)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For stacking and protecting your 1/64 diecast in acrylic case collection.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
Base file is for the bottom layer to add stability to the tower.
Extra requirements:
- Side holes are 4.2mm, use M5 thread tap taper drill bit tool;
- Top/Bottom holes are 5mm, use M6 thread tap taper drill bit tool;
- 5x8mm and 6x16mm studs for assembly.