1 / 3
Portal Companion Cube Key Cap (Fits Kailh/Cherry MX)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to fit my Kailh Box Jade switches.
- Ocena
- 4,667 / 5
- Polubienia
- 52
- Pobrania
- 283
- Wydruki
- 4
- Wyświetlenia
- 1270
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (82)Powiązane
Unfortunately the original would not go onto my Kailh switches. It was a bit small to fit . Also once I made the opening bigger, I noticed the bottom was hitting the switch. So I couldn't press it down even though the opening was good. Took 2 mm off the bottom and it fits well. Do need to use supports. Probably better suited for a .25 nozzle. But the .4 did the job. Not MMU friendly. I just quickly colored it with canvas.