Artillery X2 webcam support With led and GoPro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of FreakyDude's webcam mount where I add a gopro mount.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix of the FreakyDude model in which I have added a support for gopro in which you can use a smartphone holder from the ones that are on the web and take advantage of an old smartphone that you have at home to control the printer, you can also use a GoPro It also has a hole to put a led strip. In order for the cable to fit me I had to pass the cable through the inside and then solder the connectors.
It is printed without supports with an infill of 25%, if your printer does not have good layer cooling you may need to support the flat part that remains in the air.