Gridfinity Vase Mode bin with Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First 10 layers are solid to accommodate 6x2mm magnets.
- Ocena
- 4,625 / 5
- Polubienia
- 77
- Pobrania
- 373
- Wydruki
- 9
- Wyświetlenia
- 2483
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a slight tweak to the excellent design by @braden.eliason.
4 magnet holes are added in the base to accomodate 6x2mm magnets (press fit*).
If printing the STL, adjust your slicer settings to enable spiral vase, and then adjust 10 bottom layers to be solid.
I created a Fusion360 project with parametric magnet molds, which can be used to export an STL file to be imported as “negative volume” into PrusaSlicer in order to add magnets to any of the other bins. Simply click on Modify→Change Parameters and adjust magnetDiameter and magnetDepth.
Of course, you can simply grab one of the STLs or 3MF files and print as is - but f360 files are there for tweaking.
* Press fit capability dependent on magnet diameter tolerance. In some cases, you may need to glue some of the magnets. Use the f360 file to adjust magnet diameter for your magnet batch.