1 / 1
Minimus WM backplate remix for Longer LK5 Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the Minimus WM backplate to fit on the Longer LK5 Pro carriage.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed this backplate to use the Minimus system with wire management on my Longer LK5 Pro. Adds clearance hole for v-roller bolt, and add material around bolt hole to keep the strength needed to support the M8 or M10 Armadillo wire management system. Follow the same directions from the link to the minimus hotend cooler system. I made mine from PETG.