Wrist Slingshot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foldable wrist-mounted slingshot!
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 2000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Doric's wrist slingshot in the recent Dungeons & Dragons: Honour Among Thieves movie, I wanted to make my own!
There are files for three different sizes. I designed this for my fat arm (the size L), so I haven't tested to other sizes. If you need a specific size, let me know and I can add it!
Size L: 80x65mm
Size M: 63x51mm
Size S: 46x37mm
I printed the wrist plate in PETG, standing on its wider side, with tree supports and 50% infill and 4 walls/shells/perimeters. The prongs with 50% infill and 4 walls as well.
I designed the cradle to be printed in TPU. But if you can't, you can print it in PLA/PETG and use it as a template to cut a piece of fabric, soft plastic or rubber.
To assemble this, you need two M5 nuts and bolts at least 35mm long. Longer ones are fine, as you may see from my pictures... I didn't have perfect length bolts either.
Of course you also need a couple of strong rubber bands. I used two bands on either side.
I also used velcro strips to attach it to my wrist. The strap holes are big enough for lots of different sizes of straps as well.
If you don't have nuts and bolts or just don't feel like assembling that much, check out the print in place little brother Mini Wrist Slingshot!