Rebuild - God Eater Arc Bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In an effort to make the Band easier to print I have gone ahead and subdivided up the parts into more manageable…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
In an effort to make the Band easier to print I have gone ahead and subdivided up the parts into more manageable pieces that should print cleaner with less support.
Included are two new Cuffs a solid half that can be printed in hard plastic, or made with flexible fimanet for a wearable half, and a second version that is a shelled out version to be filled with some kind of padding but still give you a clean outer look.
I liked the original idea but the part seemed a bit rough with the low poly edges and was missing a few details, The model tolerances should allow for easy press fits on a .4nozzle. pieces ready for assembly printed the innermost band is 40MM wide. Please use this to calculate the size you need the band to be.
A Print quantities list is as follows.
Cube 1
Inner Circle 1
Outer Band 2
Peg 2
Inner Cuff either Solid or hollow version print 2
Printed pictures coming soon.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
100-200
Notes:
Assembly goes as follows.
Attach Cube to Inner Ring Attach Cuff together apply outer bands to hold in place then press pegs into each slotted hole pegs should fit flush.Category: Costume