Kossel Tooless Glass Bed Holder With Pannels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In an effort to get my Kossel running again I spent a lot of time looking into upgrades that would be good for my base…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
In an effort to get my Kossel running again I spent a lot of time looking into upgrades that would be good for my base build and try as I might I couldn't find a good bed platform to cover and keep my glass on without all sorts of tools and such knowing that the glass needed only to stay in place I found a design and while it held promise it wasn't fitted to my 200MMx3MM glass so using my research I went on to build this, it should fit most kossel the plates on the side will fit into place and are cosmetic but do offer aid in getting the spacing of the 3 clips correctly when all clips are connected it will pressure fit into place giving it a good base.
I will eventually upload a full compiling of any designed parts for this unit to keep it open source.
Print Settings
Rafts:
No
Supports:
No
Resolution:
200 microns
Infill:
30
Category: 3D Printer Parts