Guitar Head Cutting Jig (For GIBSON SG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This jig is to be used to cut the end part of the guitar head type Gibson SG. Trace the center longitudinal line of…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This jig is to be used to cut the end part of the guitar head type Gibson SG.
Trace the center longitudinal line of the piece, adjust the jig so the line is visible thru the holes, secure it and you are good to go.
It has been designed from the attached drawing.
You can download the tool with my logo on it which I find to be a fun addition.
However, you can download the same design without the logo if you prefer a less apealing look.
Any question or custom design can be ask in DMs.
Have a great day and keep printing !
Sea Bison Print Settings ==============
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament: Doesn't Matter PLA Doesn't Matter
Notes:
Any solid materials will do.
Using PLA, make sure to set 3 wall loops for a stronger tool.Category: Music