1 / 2
Sunnygeeks gamingtable corner reinforcement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner reinforcement to keep the cellarwalls from moving when leaning against them.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
There were some people in the sunnygeeks community that had some trouble with the cellarwalls moving when leaning against them if you are reaching to the other side of the table. So I designed these conerpieces which links your seperate walls together making the long pieces less likely to move. Just lift up your cellar walls and put it under it, the magnets keep it in place. You can also put a corner on top but it doesnt seem to add very much extra. I would suggest printing it in PETG.
Happy gaming!