1 / 2
Miniature ratchet and pawl mechanism — zdjęcie 1
1 / 2

Miniature ratchet and pawl mechanism

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A ratchet mechanism using pawls and thin features as springs.

Ocena
0 / 5
Polubienia
14
Pobrania
62
Wydruki
0
Wyświetlenia
882
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is part of a larger project, but it's interesting enough to play with on its own.

The model comes in five parts. The “brace” and “cap” parts should be press-fit into the base and gear, respectively. The “arm” prints with small tabs that you should snip off. You may also have to sand or file the arm down a bit so that it slides smoothly in the holes attached to the base.

I've included 3MF files for printing, and the FCStd file for tweaking in FreeCAD (v0.20.2)

Printed successfully in PLA on a Sovol-SV06, using Ultimaker Cura, with "Fine" 0.1mm layer height. I'd recommend printing the parts individually, to avoid warping on the smaller parts.

Tagi