Snap close box.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a remixed snap fit organizing box. My wife uses it to store her needlepoint supplies.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 1856
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remixed snap fit box is based from the online tutorial by Sean Kennedy (see YouTube link below). I thought his design was interesting so I gave it a go. His original model is used to encase a raspberry Pi. My version excludes the hardware holes and plays around with the dimensions. If you are new to the CAD world, I would absolutely recommend watching Sean's follow along tutorials. He takes you step by step, and shows you how to build the model from scratch.
Printing instructions:
Print each half of the box with the flat side facing down. I recommend using a brim to aid in bed adhesion and to decrease the possibility of warping. The joinery is tight right off the printer, so put the box together and take it apart a few times. The model in the pics is made from Polymaker PLA.
Feel free to print it and enjoy! :)