Tesla 'Lift Pucks' Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for 4 Tesla Model 3/Y Jack/Lift Pads/Pucks
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
If you've got a Tesla Model 3 / Y you might have lift / jack pads / pucks so you can lift your car safely either at home or at a commercial garage. They usually come in a case, but mine got a bit damaged so I quickly designed this replacement case.
The lid is snap fit so you can push it on / pull it off. This is a pretty quick and dirty design so it's not perfect and I think it could do with being very slightly taller. But I didn't want to waste material or have the pucks loose. They shouldn't rattle around in this case.
Print at almost any settings you like. I printed with 0.3mm draft on an i3 MK3S with PETG. I would recommend a higher temperature filament such as PETG if you're going to store in your car since the interior can get warm. Consider a colour change on the lid so that the text can stand out.
Important: The lid needs to be printed face down, but the STL has it face up. Flip the lid over in your slicer.