1 / 2
Bambu Lab X1-Carbon / P1P / P2S Poop Shoot removable bucket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by existing models, but with removable waste garbage can and hold by magnets
- Ocena
- 4,932 / 5
- Polubienia
- 428
- Pobrania
- 4605
- Wydruki
- 45
- Wyświetlenia
- 17 085
- Oceny
- 44
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 45) (Komentarze: 66)Remiksy (1)Kolekcje (557)Powiązane
Print in PLA
No supports needed
Just glue Face and Tray together
Hold at the printer by 10x2 magnets
Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
