FLY ADXL345 Bed Clamp (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Version to fit the Mellow FLY ADXL345
- Ocena
- 4,333 / 5
- Polubienia
- 22
- Pobrania
- 216
- Wydruki
- 3
- Wyświetlenia
- 1305
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed to fit the FLY ADXL345 which has a slightly higher screw distance than the original adxl345 board and needs standoffs on both sides because it has components on both sides of the pcb
Added a Simple plate too for measuring X Axis (Hotend). The Plate gets squeezed between nozzle and heatblock by tightening the nozzle against it. This only works for the V6 style nozzles.
Can be kinda tricky to get it in position since the nozzle should only be screwed when the hotend isnt cold, but then the plate could melt. So i recommend higher temperature filamten for this (PETG / ABS)