1 / 4
Thunderstruck, springthunder shell adapter.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like modular systems, thats why i made this. The original versions used hinges, i decided that that was too complicated and unreliable. Originally made for dart zone blasters they also will work on any compression barrel system by choosing the “16mm”" option. (just make sure the seal is good maybe some electrical tape).
Infill: Does not matter
Supports: Only under the barrel (NOT IN THE PCAR!)
Remixes are welcome and encouraged.
DISCLAIMER, the springthunder shells are not mine i have not designed them. They are made by GDOP26