1 / 6
Tissue box holder on tape (F360 parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fusion 360 parametric holder. Attach with double sided tape/command tape. Box attached with rubber-band.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 449
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Tissue Box holder attached with double sided tape
I was tired of holding the box when pulling tissues, so I made a simple attachment that holds it steady on or under the shelf.
I recommend using command strips, as they can be easily removed when you want to change place of the holder or put it away.
Adjust for your size
Open in Fusion 360 and edit X and Y parameter. Alternatively, you can just scale it in slicer (but wall thickness would differ then).
Print and use
- PLA is sufficient, you can get fancier material if you want
- Print 2 times - model is symmetrical, so no mirroring is needed.
- Find sufficiently long rubber-band
- Attach to your desired place with command strip or double sided tape.
- Width for attachment is 16.5mm, length depends on the box size