Christmas Star Lamps!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of lamps that take standard LED battery lights.
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 287
- Wydruki
- 6
- Wyświetlenia
- 1738
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Share Alike
A pair of lamps that take standard LED battery lights.
Print instructions
There are two versions of the lamp, one for the Prusa Mini and one for the Prusa MK3S.
The Prusa MK3S lamp is 204mm tall and has layers and walls optimised for the default 0.3mm draft preset in Prusaslicer.
The Prusa Mini lamp is 174mm tall and has layers and walls optimised for the default 0.25mm draft preset in Prusaslicer.
Both print well with the default Prusament PLA preset.
You will need a set of 20 battery LED lights with an LED diameter of 5mm. Assembly is very simple, the LEDs clip into the grippers inside the fronts, and the backs then clip into the fronts. Make sure the cable passes through the slots in the back. If you find the LEDs or backs a bit loose you can use a few drops of hot glue to hold them.