Adaptor Disk for Prusament Spools for Bambu Re-Spooler by Miklos Kiszely
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor for Prusament Spools
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 168
- Wydruki
- 5
- Wyświetlenia
- 1323
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the spool locking mechanism of the spool rewinder by jcjames_13009 I remixed the flat 50mm Spool holder of the wonderful Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder by Miklos Kiszely. I use the Bambu Re-winder for my Prusa I3 MK3S+ to respool other than Prusa filaments onto Prusament spools. In my opinion Prusament Spools are a better fit for the Autorewind Spoolholder by Vincent Groenhuis Than most other spools with bigger center holes.
The standard flat 50mm adaptor discs do the job, but I wanted an adaptor that stays in place even when you remove the geared axis. That is why I used the hexagonal spool frame pattern for attaching the disc to the spool.
I recommend using two of the hexagonal adaptor discs for one Prusament spool.
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra