1 / 7
Jumpin Game — zdjęcie 1
1 / 7

Jumpin Game

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Another in the 3M bookshelf games series, a pawn jumping game.

Ocena
5 / 5
Polubienia
20
Pobrania
55
Wydruki
0
Wyświetlenia
540
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

Another in the 3M bookshelf games series, a pawn jumping game.
The board is nearly the max printable area of the Replicator 2.

Print instructions

Category: Games Summary

Another in the 3M bookshelf games series, a pawn jumping game.
The board is nearly the max printable area of the Replicator 2.

Instructions

I printed the board in one piece, glass plate with hairspray, .34mm thickness. This requires perfect tramming of the build plate. It took me several times to get it so that the ends didn't warp. If I were to do it again I think I would have used a raft.

I included the stl for both the single piece and all the pieces for one color. A raft is nearly required since very little of the piece is attached to the build plate. Also I would highly recomment not printing one piece at the time, that doesn't allow enough time for each layer to cool and the top becomes a melted mess. I did mine at .2 mm resolution.

Tagi