NEMA-15r panel cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows to make a cut out in the panel to fit in 2 pin US AC sockets NEMA-15r with spring wings on the sides
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I'm working on the controller for the beside lamps, which requires an enclosure with two panel mounted 2-pin AC sockets, like these
I couldn't find a corresponding model, or existing designs that use these sockets. So I had to design a cutout template, which is essentially a body that can be aligned with the face of a detail and used to cut out a hole into which the socket above will snap tightly.
I've attached both STL and source files (Fusion 360 + STEP). In Fusion 360 one face of the tool body is painted red. This is the face that has to be aligned with the panel's face. I hope attached pictures would make sense
