Pop up square basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the pop out basket I initially displayed at #mrrf18.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1083
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the pop out basket I initially displayed at #mrrf18. The basket can lay flat and appear as a trivet or you can lift up and rotate the handle where it pops out into a 5 section basket.
Print instructions
Category: Containers Summary
This is the pop out basket I initially displayed at #mrrf18. The basket can lay flat and appear as a trivet or you can lift up and rotate the handle where it pops out into a 5 section basket.
Print Settings
Printer:
Raise 3D N2+
Rafts:
Yes
</div>Supports:No
Resolution:
.25mm
</div>Infill:15%
Notes:
Print the test model to see if the pop up mechanism works well, if too stiff lower your flow rate and if too loose increase your flow rate. Print the top part on a raft to avoid the cuts getting fused together. The top get glued to the base, be sure to only glue the pegs and the area close to the peg so that the basket can still pop up.
Designed in OpenSCAD