1 / 32
Woven Basket Round Rods
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another "woven" 3d printed basket. My first design in Fusion 360.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 813
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (30)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Another "woven" 3d printed basket. My first design in Fusion 360. Make sure to align to origin to get everything lined up. I did this multicolor but it isn't required.
Print instructions
Category: Containers Summary
Another "woven" 3d printed basket. My first design in Fusion 360. Make sure to align to origin to get everything lined up. I did this multicolor but it isn't required.
Print Settings
Printer:
Raise3D N2+
Rafts:
Doesn't Matter
</div>Supports:No
Notes:
The model assumes using a nozzle width of 0.4mm.