Sine Wave Woven Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to do something different for #waveywednesday so I combined my 3dp weaving technique with a basket designed…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 951
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted to do something different for #waveywednesday so I combined my 3dp weaving technique with a basket designed with a sine wave formula.
This can be done Multi color or single color. To get the weaving effect with a single color make sure the posts and the weave use different processes or they will be merged together.
Important: The design assumes an extrusion width of exactly 0.4mm so for best results you need to use a 0.4mm nozzle and set the extrusion width to 0.4mm. You can try to use a different size nozzle but then you need to scale the whole model (for example to use a 0.5mm nozzle 0.5/0.4=1.25 so scale to 125%) and since I haven't tried it myself I can't promise it will work.
The suffix L is for the large model, S for the small. You need all 5 stl files, base, post, weave1, weave2, and rim and you need to align model origins.
If you print this upload a picture and tag me on Twitter @patterntoprint
Print instructions
Category: Containers Summary
Wanted to do something different for #waveywednesday so I combined my 3dp weaving technique with a basket designed with a sine wave formula.
This can be done Multi color or single color. To get the weaving effect with a single color make sure the posts and the weave use different processes or they will be merged together.
Important: The design assumes an extrusion width of exactly 0.4mm so for best results you need to use a 0.4mm nozzle and set the extrusion width to 0.4mm. You can try to use a different size nozzle but then you need to scale the whole model (for example to use a 0.5mm nozzle 0.5/0.4=1.25 so scale to 125%) and since I haven't tried it myself I can't promise it will work.
The suffix L is for the large model, S for the small. You need all 5 stl files, base, post, weave1, weave2, and rim and you need to align model origins.
If you print this upload a picture and tag me on Twitter @patterntoprint
Print Settings
Printer:
Railcore, Raise3D N2+
Rafts:
Doesn't Matter
</div>Supports:No
Resolution:
I printed at 0.25mm but not critical
</div>Filament:
Polyalchemy, Esun PLA