AVlabs AV-BPH MK I Bed Phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple AVlabs phone holder that clamps on the wooden beam above my bed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
AVlabs AV-BPH MK I
A simple thing that clamps to the wooden beam on top of my bed. It has a 2020 aluminium extrusion that allows to the phone holder to be suspended, so I can watch videos and movies hands free in my bed.
The 2020 extrusion is clamped to the wooden beam using 2 symmetrical PETG parts. M8 bolts clamp it from both the inside and the outside, and a tpu insert is available to add grip between the beam and the PETG clamp.
Then, the 2020 extrusion can be secured to the clamps using M5 BHCS bolts and T nuts.
The rotative Connector needs a small M5 threaded insert, and is then secured to the phone holder body with shorts M5 BHCS bolts. Then, we can add 1 axis of rotation bu adding the hinge, (adapter plate.stl), using M4 bolts and nuts. Secure it “enough”, so it's tight but still allows rotation. Finally, you can secure the hole assembly from one of the 3 holes in the adapter plate to the extrusion using M5 bolts and T nuts.
Depending on your phone's size, you need one of the full size TPU spacers (the ones in the shape of lego bricks ^^), and the half sized ones. Be warned, you might only need one half sized spacer depending on where your phone's speaker is, otherwise you might get muffled sounds. z