1 / 2
LDO Voron 0.2 Picobilical ADXL Ribbon Extender — zdjęcie 1
1 / 2

LDO Voron 0.2 Picobilical ADXL Ribbon Extender

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ribbon extension with magnetic cover for LDO voron 0.2 or 0.1 picobilical

Ocena
5 / 5
Polubienia
14
Pobrania
43
Wydruki
1
Wyświetlenia
890
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

No more flipping your printer around, unscrewing the panel clips, inserting the ribbon, flipping the printer back around, dangling the ribbon from the rear to the front door, and to your toolhead sketchily. 

used these from https://www.aliexpress.us/item/2255800712151323.html?spm=a2g0o.order_list.order_list_main.33.6ce21802gt5Eoy&gatewayAdapt=glo2usa

get the 8P ones, with the longer ribbon

2x 6x3mm magnets needed

Insert the 6x3mm magnet on the cover all the way to the bottom, you can use something like another magnet and use a vise or pliers to push the magnet all the way to the bottom so that way when you put the cover on, the magnet on the frame sits nicely inside the cover, keeping it in place when using higher accelerations

Insert the ribbon between the frame pcb and the frame pcb printed part, and out through the little slot

Use double sided tape ie. 3m's double sided clear tape to hold down the extension board to the frame pcb