BTT PITFT43 Voron 0.2/0.1 trident skirts front screen mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
more solid pitft43 mount
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1090
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
remix of 2 different mounts to make a more solid mount for the v0.2, added a little flair to the side of the frame aswell
Tilted the screen so it wasn't flat like a pancake, and took up less Y axis real estate on your table/desk, and moved it up a little closer to the door, so the door clears the screen by 1-2mm, and closer to the printer itself so you don't see the extrusion above the screen, and if you need to adjust the dimmer knob, just open the door and you can adjust it
put heatsets into screen frame
Use m2.5 to screw top part of mount to screen frame, and m3x10 screws to mount lower frame mount to screen frame through heatsets
use included screws with pitft43 to mount the screen into the frame, dont forget to run the ribbon cable through the screen frame slot
also run it through the slot on the skirt/mount before installing the ribbon into your Pi/DSI device